Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 19 / 327

Product description
19 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
(1) Drawbar
(2) Supporting leg
(3) Main gearbox
(4) Electro-hydraulic control block
(5) Conveying unit
(6) Folding automatic charging system (front
panel)
(7) Pick-up
(8) CFS drum
(9) Holding-down device with pulley
(10) Guide wheel
(11) Chain drive, pick-up
(12) Additional guide wheel
(13) Rotor gear
(14) Chassis
(15) Access door and ladder
(16) Feed gearing, transport floor
(17) Beaters
(18) Superstructure
(19) Tailgate
(20) Rear angular gear, dosing unit
(21) Feed gearing, transport floor
(22) Parking brake
(23) Cutting unit
(24) Angular gear CFS
(25) Rotor, beater and pick-up drive
2.2 Chassis
Depending on the machine's equipment, the chassis consists of:
•
a Bogie tandem chassis

with passive steering

with forced steering axle (only with bottom linkage)

with dual-line compressed-air brake system and mechanical ALB regulator

with hydraulic brake system
•
a hydraulic tandem or tridem chassis with adjustable travelling height:

with passive steering

with forced steering axle (only with tandem chassis with bottom linkage)

with dual-line compressed-air brake system and mechanical automatic load-sensitive
brake pressure (ALB) regulator
2.2.1 Bogie tandem chassis
3-leaf parabolic springs serve as a compensating rocker arm in the bogie tandem chassis.
In case of bumps, the large swing paths ensure an even load distribution onto both axles.