Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual, Page: 141 / 327

Operation
141 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
6.1.3.5 Switch Discharge mode A II on (machine without beaters)
The Discharge Mode A II is automatically switched off when the
tailgate is lowered.
During discharge, the transport floor feed can be switched on and
off as often as desired by pressing the key.
1. Press the key once when being on
the clamp silo.
The following functions will automatically
be carried out one after the other:

Lift tailgate

Switch transport floor on when the
tailgate has reached its end position
The screen shows:
6.1.3.6 Switch discharge mode A II on (machine equipped with beaters)
The Discharge Mode A II is automatically switched off when the
tailgate is lowered.
During discharge, the transport floor feed can be switched on and
off as often as desired by pressing the key.
Switch the p.t.o. shaft off to discharge step by step.
The beaters and the transport floor stop. The transport floor
automatically switches to standby mode and the "Feed On"
symbol is flashing.
1. Press the key once when being on
the clamp silo.
The following functions will automatically
be carried out one after the other:

Lift tailgate until the set first opening
width is reached.

Switch gearboxes and clutches

Switch transport floor to standby
mode when the tailgate has reached
its set first opening width. The "Feed
on" symbol is flashing.
The screen shows: