Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual, Page: 123 / 327

Commissioning
123 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
5.13.3 Disconnect brake system
WARNING Risk of crushing, cuts, becoming entangled, being drawn in
and risk of impact if the machine accidentally rolls due to the
service brake being released!
Always disconnect the hose coupling of the feed line (red) first and
then the hose coupling of the brake line (yellow).
The machine's service brake only moves to brake position if the red
hose coupling is disconnected.
It is imperative to observe this order, as otherwise the service brake
system will be released and the non-braked machine may start to
move.
When the machine is unhitched or torn off, the feed line connected
to the trailer brake valve bleeds. The trailer brake valve
automatically switches over thus actuating the service brake system
in accordance with the automatic load-sensitive brake pressure
control.
5.13.3.1 Disconnect dual-line service brake system
1.

Secure the machine against accidental rolling. Use the parking brake and in addition the chocks
for this purpose if necessary.
2.

Disconnect the hose coupling of the feed line (red).
3.

Disconnect the hose coupling of the brake line (yellow).
4.

Fix the hose couplings to the blank connections.
5.

Close the caps of the hose couplings at the tractor.
5.13.3.2 Disconnect hydraulic brake system
1.

Use the parking brake to secure tractor and machine against accidental rolling.
2.

Make sure that the hydraulic pipe between tractor and machine has been depressurised.
3.

Uncouple the hydraulic sleeve.
4.

Slip the hydraulic sleeve onto the machine's blanked-off connecting piece.