Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 121 / 327

Commissioning
121 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
5.13 Unhitch machine
Ensure that there is always still enough free space in front of the
machine when unhitching the machine such that the tractor can
reapproach the machine in true alignment for hitching the machine
again.
1.

Secure the machine against accidental rolling.
2.

Always check the machine for visible defects during unhitching.
3.

Lower the supporting leg.
4.

Disconnect the hydraulic hose pipes and put the plugs down into the rainproof plug deposit.
5.

Disconnect the service brake system.
6.

Disconnect the lighting.
7.

Uncouple the propeller shaft.
8.

Disconnect the control set and put the plug down into the rainproof plug deposit.
9.

Uncouple the forced steering axle (if available).
10.

Uncouple the drawbar.
11.

Move the tractor forward.
5.13.1 Uncouple drawgear
5.13.1.1 Tow-hook (hitch hook) and drawbar lug (hitch ring)
1.

Secure the machine against rolling.
2.

Lower the supporting leg to support position.
3.

Lower the tow-hook.
4.

Move the tractor forward (approx. 25 cm).
5.

Lift the tow-hook.
6.

Secure the tractor against accidental starting and rolling.
7.

Disconnect the supply lines.
8.

Place the supply lines onto the hose holder.
9.

Move the tractor forward.