Stratus V 6624, Hardware Installation Manual, Page: 51 / 78

Powering On the System
Connecting and Powering On the System 2-19
3. To power on the ftScalable Storage G3 system , perform steps a through d for
each power supply unit (PSU) in the system.
N O T E S
1. Power on all expansion enclosures first . This
ensures that the disks in the expansion enclosure
have enough time to completely spin up before being
scanned by the controller modules in the controller
enclosure.
2. The PSUs in the ftScalable Storage G3 system do not
have power switches. Switchless PSUs power on
when connected to a power source, and they power
off when disconnected.
a. At the back of the enclosure, plug the power cord into the power cord connector
( Figure 2-13 ) in one of the PSUs.
Figure 2-13. Power Supply Unit
1 Power cord connector
taz059b
1