Stratus V 6624, Hardware Installation Manual

Page: 37 / 78

Connecting External Components to the System
Connecting and Powering On the System 2-5
3. Connect the Ethernet cable (number 3 ) from the Ethernet switch to the LAN2 port
(the upper port) of the console server.
4. Connect the Ethernet cable (number 4 ) from the external network to the LAN1 port
(the lower port) of the console server.
5. Turn the console server power switch to the on (1) position.
6. Test the operation of the console server by sending an RSN mail message to the
CAC and asking them to connect to your server. If the console server is not
working, the CAC will help you correct the problem.
Connecting the AA-E97900 RSN Console Server to a Modem
Figure 2-4 shows the AA-E97900 RSN console server connections to a modem.