Stratasys uPrint, Service Manual, Page: 81 / 383

4-34
Hard Drive
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
• Phillips screwdriver
Hardware
• 6-32 x
1
⁄
4
” Phillips pan head screws (x8)
Removing the SATA Hard Drive
1.
Open the electronics bay. See Opening the electronics bay on page 4-15.
2.
Touch the metal plate of the electronics bay cover to discharge any static electricity.
3.
Disconnect the power input cable by pressing the metal tab in and pulling down. See
Figure 4-59.
Figure 4-59: Hard drive power cable location
4.
Disconnect the SATA cable by pressing the metal tab in and pulling down. See Figure 4-
60.
Disconnect the
power input cable