Stratasys uPrint, Service Manual, Page: 58 / 383

uPrint/uPrint SE Service Manual 4-11
Front Panel
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
Hardware
• 10-32 x
1
⁄
2
” slotted screws (x8)
Removing the front panel
1.
Open the chamber door.
2.
Remove the display panel. See Removing the display panel on page 4-9.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 2 mounting screws from
behind the display panel. See Figure 4-26.
Figure 4-26: Front panel mounting screw locations
4.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 6 mounting screws from the
front panel. See Figure 4-27.
Remove the 2 mounting
screws from behind the
display panel