Stratasys uPrint, Service Manual, Page: 330 / 383

uPrint/uPrint SE Service Manual 6-63
Fused layers
Characteristics: Layers appear to be fused together.
81.
Corrective actions
1.
Check Z stage:
A.
Check connections to Z motor.
B.
If head is digging in to the part, check Z motor belt tension.
C.
Check to see if Z stage is jamming.
D.
Verify the Z stage is level.
E.
Verify proper operation of the Z jamming flag. May have become magnetized.
F.
If Z stage is running in to the head, verify correct position of the travel sensors.
2.
Run Z calibration.