Stratasys uPrint, Service Manual, Page: 186 / 383

uPrint/uPrint SE Service Manual 4-139
Chamber Fans
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
•
5
⁄
16
” box wrench
Hardware
• 10-32 x
3
⁄
8
” slotted screws (x8)
• 8-32 x
1
⁄
2
” slotted screws (x4)
Removing the right side chamber fan
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 4 mounting screws from the
right side heater panel. See Figure 4-242.
Figure 4-242: Right side heater panel mounting screw locations
4.
Using a
5
⁄
16
” box wrench, remove the 2 chamber fan mounting screws. See Figure 4-243.
Figure 4-243: Right side chamber fan mounting screw locations
Remove the 4
mounting screws
Remove the 2
mounting screws