Stratasys uPrint, Service Manual, Page: 140 / 383

uPrint/uPrint SE Service Manual 4-93
X Motor
Required Tools
•
5
⁄
16
” nut driver or standard screwdriver.
•
1
⁄
2
” box wrench.
•
3
⁄
32
” allen wrench.
•
1
⁄
8
” allen wrench.
• Cutters.
Hardware
• Wire tie
• 10-32 x
3
⁄
8
” slotted screws (x16)
• 10-32 x
1
⁄
2
” slotted screws (x4)
• 8-32 x
1
⁄
2
” socket head cap screws (x4)
Removing the X motor
1.
Remove the top panel. See Removing the top panel on page 4-5.
2.
Remove the side panels. See Side Panels on page 4-7.
3.
Using a
5
⁄
16
” nut driver or standard screwdriver, remove the 7 left side access panel
mounting screws and remove the left side access panel. See Figure 4-158.