Circuit Breaker
A Type-C circuit breaker with the following specification is required on the power line (subject to the
local electrical code).
Voltage
Circuit Breaker
220-240 VAC
16 A
Table 3 Circuit breaker
Residual Current Device (RCD)
The wall outlet must be connected to a residual current device (RCD).
Power Connection
The following diagram shows how to connect the printer to the local power supply.
Figure 7 Electrical connection
The following electrical outlets are required:
•
one outlet (C19) behind the printer wired directly to the UPS
•
three outlets close to the printer (for servicing equipment)
Objet1000 Plus
Electrical Requirements
14