Electrical Requirements
The customer is responsible for ensuring that all tasks described in this section are performed by
qualified personnel.
Power
A stable, reliable source of power is required. Power to the UPS should be supplied directly from the
main electrical panel. The power line should not be connected to other electrical outlets.
Printer input power rating:
•
230 VAC
±
2%, 50–60 Hz, 1 phase
•
Full load current: 8 A
•
Short circuit rating: 15 A
Printer short circuit rating: 10,000 A
If the power at the facility does not support the above specifications, contact your Stratasys
specialist.
Important:
The diagram below shows the required connection to the power socket. Make sure
that the electrician sees this before installing the printer.
Figure 6 Connection diagram
Grounding
The printer is grounded through a single-phase, AC plug. Make sure that the AC outlet is properly
grounded, in accordance with local electrical codes.
Objet1000 Plus
Electrical Requirements
13