Stratasys J4100 User Guide
4 Operating and Maintaining the Printer
DOC-26000 Rev. C
4-88
6. Click
Done
in the final wizard screen.
Figure 4-125 Final wizard screen
Replacing the UV Lamps
The UV lamps used for curing models have a long, but limited, working life. You
can test and adjust their effective power with the UV Calibration wizard (see
"Testing and Calibrating the UV Lamps" on page 4-74). If you need to replace a
UV lamp bulb or UV reflector, follow these instructions:
To replace the UV lamp bulb or UV reflector:
1. Make sure the printer is in
offline
mode.
Figure 4-126 Offline mode indicator (red)
The
online/offline
button at the bottom of the printer interface should be red. If
not, click it to switch the printer to
offline
mode.
Warning
Before continuing, make sure that the safety interlock is not defeated, and that
the UV lamp is not hot.
