Stratasys Eden350V, User Manual

Page: 133 / 182

DOC-03050 Rev. A
6–27
Eden350V User Guide
Improving
Print Quality
If you suspect that print quality is poor, perform the pattern test (see
“Pattern Test” on page 26). If the results are poor, use the following
procedure to improve print quality.
If the results of the last pattern test are poor:
1. From the Options menu, select
Purge Sequence
, or press
F4
.
2. In the confirmation dialog box, click
Yes
.
The print heads are purged of Model and Support material, and the
wiper removes excess material from them.
3. Repeat the purge sequence.
4. Perform the pattern test.
If the results of the pattern test are still poor:
1. Manually clean the print heads (see “Cleaning the Print Heads and the
Roller” on page 21).
2. Perform the purge sequence.
3. Perform the pattern test.
If the results of the pattern test are still poor:
1. Carefully clean the print heads again, making sure there is no residue
left on them.
2. Perform the purge sequence.
3. Perform the pattern test.
If the results of the pattern test are still poor:
¾
Optimize the print heads and replace faulty print heads, if necessary
(see “Calibrating Print Heads” on page 37).