Stratasys Eden350V, User Manual

Page: 106 / 182

Using Objet Studio
5–70
DOC-03050 Rev. A
Scheduling Jobs
You can schedule jobs to be printed at a future time. For example, you can
configure Objet Studio to start long printing jobs in the late evening and
early morning hours.
To schedule a job:
1. Select a job in the Jobs Queue , and click on the pop ‐ up toolbar.
2. In the Scheduler dialog box, set the Start Date and Start Time for the job.
Click on the Start Date arrow to open a calendar.
Figure 5-102: Scheduler with calendar displayed
3. Click
OK
.
Exporting Jobs ( objzf )
You can save print jobs as compressed files.
To export a print job:
1. Select a job.
2. On the pop ‐ up toolbar, click .
3. In the Save As dialog box, select a folder.
4. Click
Save
.
Modifying the Job Manager Screen
You can change the size of the sections of the Job Manager screen, by
dragging the panel edges. This applies to:
•
the Jobs Queue panel
•
the Time panel
•
the History panel
Similarly, you can change the way the screen area is divided between the
main section ( Jobs Queue / Time / History ) and the panels on the right side of
the screen.
You can collapse (hide) the right panels ( Available Resources / Material
Consumption / Tray View ) by clicking the top of the panel.
•
Click again to display the panel.
For an explanation of objzf files, see “Exporting and Importing Build Trays”
on page 46.