Eden260V User Guide
5 Using Objet Studio
DOC-32020 Rev. F
5-45
If the build tray file has not been saved when you click
Build
, the
Save As
dialog box opens for you to save it.
Objet Studio checks if there is a problem with the positioning of objects on the
tray. If so, the affected objects are displayed with special colors (see "Tray
Validation" on page 5-42), and a warning message appears.
Figure 5-53 Tray validation warning message
➢
To cancel the
Build
command so you can correct the problem, click
No
.
➢
To print the models as they are positioned on the tray, click
Yes
.
The
Job Manager
screen opens, so you can monitor the progress of your
trays—before, during, and after printing. See "Monitoring and Managing Print
Jobs" on page 5-65.
