Eden260V User Guide
6 Operating and Maintaining the Printer
DOC-32020 Rev. F
6-3
Figure 6-1 The Eden260V 3D Printer
Starting the Printer
Caution
l
Do not attempt to operate the printer before being trained by an authorized
Stratasys representative.
l
Observe all safety warnings and follow the safety guidelines described in
Chapter 2.
1. Turn on the main power switch, located at the back of the printer.
Figure 6-2 Main power switch and cable
The main power switch turns on the Eden260V printer, which includes the
built-in computer.
