Maintenance
Removing the Cover
Page 16
© Copyright 2019 Stratasys. All rights reserved.
Stratasys Confidential
Maintenance
Perform maintenance on the CSIIP CleanStation:
•
once a year
•
if the cleaning quality is low (even if the solution saturation is within specifications)
•
if the filter is blocked
Removing the Cover
To remove the cover:
1. Close the cover.
2. Using a 7/16 inch (11 mm) socket wrench, remove the nuts on both sides of the cover.
Figure 9: Cover nuts
3. Lift off the cover.
Warning: Electrical Hazard.
For all maintenance procedures, disconnect the power cable from the electrical
socket and wear protective clothing (see
When the cover is removed, it is recommended to clean residue from the area
around the cover.
