X2O Media Player-R
P 5 / 16
c.
If using wired networking, plug a network cable into the RJ-45 jack on the unit.
d.
If using wireless networking, screw the included antenna(s) into the antenna connectors on
the unit.
e.
If the power is not provided by the network cable (not cabled or PoE not supported by the
network connection or the device), plug the power cord into the power connector on the
unit. Plug the other end of the power cord into a suitable 120V or 240V electrical outlet.
Once power is applied, the
X2O Media Player
should start automatically and show the
Activation
screen as below.
Note that the Player ID displayed in the top-left corner is unique to each device. Also, if you did not
connect the device to a network using an Ethernet cable or by configuring the Wi-Fi, you will get an
error that the
X2O Media Player
cannot connect to the server.
