Strata CIX 200, Programming Manual

Page: 390 / 508

Services
Strata Net Over IP
9-40
Strata CIX Programming Vol.1 12/09
Strata Net Over IP
System Availability: Not available with CTX28
To use programs 671 and 672, refer to “Strata Net over IP Programming Guidelines” on page A-21 .
671 IP Address Convert Table
1. Select > Strata Net > Network Over IP. Go to the IP Route tab.
2. Enter Program 671 data.
3. Get Default - sets all data to factory defaults.
4. Click Submit .
F
IELD
D
ESCRIPTION
Remote Node ID Enter the node ID of the remote CIX that the primary CIX should route to
in the IP private network.
Possible values:Up to six digits (default = no data)
01 IP Address Route 1 Enter the IP address of the remote xIPU that should be routed to first.
Possible values:Valid IP address
02 IP Address Route 2 Enter the IP address of the remote xIUP that should be used if all
channels in the first xIUP route is busy or disabled.
Possible values:Valid IP address
03 IP Address Route 3 Enter the IP address of the remote xIUP that should be used if all
channels in xIUP Route 1 and 2 are busy or disabled.
Possible values:Valid IP address
04IP Address Route 4 Enter the IP address of the remote xIUP that should be used if all
channels in xIUP Route 1, 2 and 3 are busy or disabled.
Possible values:Valid IP address
05 IP Address Route 5 Enter the IP address of the remote xIUP that should be used if all
channels in xIUP Route 1, 2, 3 and 4 are busy or disabled.
Possible values:Valid IP address
06 IP Address Route 6 Enter the IP address of the remote xIUP that should be used if all
channels in xIUP Route 1, 2, 3, 4 and 5 are busy or disabled.
Possible values:Valid IP address