Strata CIX 200, Programming Manual

Page: 367 / 508

Services
LCR/DR
Strata CIX Programming Vol.1 12/09
9-17
Ser
v
ices
521 LCR Route Plan Digit Analysis Assignment
Prerequisite Program: 520 page 9-16
This command assigns number to the Route Plan Analysis Table.
F
IELD
D
ESCRIPTION
00 Analysis Digits Enter the external digit strings (area codes, toll prefixes, service codes, etc.)
to be assigned to a Route Plan.
A Route Plan Analysis Table may have up to 1280 members in CTX28,
CIX40, CIX100, CIX200 and CIX/670 basic and expanded.
A Route Plan Analysis Table may have up to 2500 members in CTX28,
CIX40, CIX100, CIX200 and CIX/670 basic and expanded.
A digit string can only be in one table at a time.
Digits may include wild cards 'X' and 'N' where X = 0~9 and N = 2~9.
A digit string may be up to 7 digits for CTX28, CIX40, CIX100, CIX200 and
CIX/670 basic and expanded.
A digit string may be up to 19 digits for CIX1200 basic and expanded.
(default = no value)
01 Route Plan Number Enter the LCR route plan number that should be used.
Total Route Plans available for CTX28, CIX40, CIX200 and CIX670 basic or
expanded is 64.
Total Route Plans available for CIX1200 Basic or expanded is 128.
Entering Remove deletes the Analysis Digits from the table where they had
been assigned.