Strata CIX 200, Programming Manual

Page: 320 / 508

IP Telephone Programming
IP Telephone Installation and Network Connection Setup
8-6
Strata CIX Programming Vol.1 12/09
150 System IP Data
Prerequisite Program: Assign the MIPU, GIPU, LIPU and BIPU cards in Program 100. Create Stations
using Programs 200 and 260. Set IP telephone data assignments with Program
250.
This command assigns system-wide IP parameters.
1. Select IP-Telephony > System IP Data.
2. Enter values in the appropriate fields.
3. Get Default sets all values to factory defaults.
4. Click Submit .
F
IELD
D
ESCRIPTION
01 Automatic
Assignment of Station
ID
Enable Automatic Assignment of Station ID when the IP telephone has no station
ID. In program 250, field 04 is the same parameter and is per terminal.
When IP telephone searches to connect a CIX with no station ID, the CIX looks for
a PDN which is set with this parameter as “automatic,” and sends the PDN to the
IP telephone and sets it in the setting of IP telephone.
Possible values:Enable or Disable (default = Disable)
02 Terminal
Authentication
Enable this parameter if you want to set the PDN of an IP telephone.
When enable is set, terminal authentication by MAC address of IP telephone is
valid. If another IP telephone which has the same PDN is connected to the
network, the CIX rejects the registration of this IP telephone because the MAC
address of IP telephone is different.
When disable is set, you can move the PDN from an IP telephone to another IP
telephone and another IP telephone can be connected to the CIX.
In program 250, field 05 is the same parameter for the terminal.
Possible values:Enable or Disable (default = Disable)
03 Diffserv Enable Diffserv (Differentiated Services) priority control if voice packets on an IP
(internal) network should be prioritized with priority tagging. Higher priority, time-
critical BIPU/IPT voice traffic can have preferential treatment when other traffic is
running at best effort. If Diffserv is enabled you must set the 04 TOS Field Type as
DSCP or TOS.
Note : Diffserv is usually not a standard feature with most ISPs.
Contact your ISP to make arrangements to provide Diffserv or this feature will not
work correctly.
Possible values:Enable or Disable (Default)
04 TOS Field Type If 03 Diffserv is enabled, select DSCP (Differentiated Services Code Point format)
or TOS (Type Of Service format).
Then, if TOS is selected, set the packet priority level in 05 TOS Precedence Type.
Then, if DSCP is selected, set the packet priority level in 06 DSCP.
Possible values:TOS or DSCP (Default)