1
Quick Start Guide
AurorA 12 LED Strip
64508002 rEV A 10/21
aurora 12 Led Strip
64508-002
POWER CONNECTOR
AurorA 12 LED Strip
QUICK START GUIDE
(this document)
WARRANTY CARD
INCLUDED ITEMS
OVERVIEW
This document provides basic setup instructions and safety
warnings for the following product(s):
POWER
CONNECTOR
WARRANTY
CARD
QUICK START
GUIDE
iNStaLLatiON aNd SetuP
7
1
2
4
3
5
6
MOUNTING
The unit should be mounted via its screw holes on
the bracket. Always ensure that the unit is firmly
fixed to avoid vibration and slipping while operating.
Always ensure that the structure to which you are
attaching the unit is secure and is able to support
a weight of 10 times of the unit’s weight. Always
use a safety cable that can hold up to 12 times the
weight of the unit when installing the fixture. The
luminaire must be mounted by professionals.
CONTROL PANEL
1
Lcd display - shows menu and selected function
2 Buttons:
MeNu - to select programming functions
dOWN - to go forward in selected functions
uP - to go backward in selected functions
eNter - to confirm the selected function
3 dMX iN - 5-pin XLr cable to link the dMX
console
4 dMX Out - 5-pin XLr cable to link next fixture
5 POWer iN - connects to power supply
6 POWer Out - connects to next fixture
7 artNet/sacN - rJ45 connector to link artNet/
sacN from source
Quick reFereNce dMX MaPS
The Aurora 12 LED Strip has the following DMX modes:
• SSCC Mode (Default) 1 Zone
• SSCC Mode 4 Cell
• SSCC Mode 12 Cell
• SQCC Mode 1 Zone
• SOCC Mode 1 Zone
• SOCC Mode 4 Cell
• SOCC Mode 12 Cell
Quick reference maps for each mode can be found on the following pages. For full DMX maps, refer to
the user manual.
