background image

Safety warnings

Important note: Please read this booklet before installing and switching on this 
appliance. The manufacturer assumes no responsibility for incorrect installation 
and usage as described in this booklet.


  is known as R600a(Isobutene) and is environmentally friendly but can be 
  combustible. Care should therefore be taken when handling or transporting
  the product to ensure that none of the refrigeration circuit components are
  damaged,
•Do not obstruct ventilation openings in the appliance.
•The appliance must not be placed or rested on its power cord.
•Do not use mechanical devices or other artificial means to accelerate the 
  defrosting process, such as a heater or a hair dryer.
•Do not use electrical appliances in the refrigerator compartment of the 
  appliance.
•If this appliance is to replace an old refrigerator with a lock, the lock must
  be removed as a safety measure before storing it or disposing of it. This is to 
  protect children from locking themselves inside the appliance.
•Old refrigerators and freezers contain insulation gases and refrigerant, they
  must be disposed of properly. Contact your local authority or your dealer if
  you have any questions. Please ensure that you do not damage the scrap unit
  prior to being picked-up by the relevant waste disposal service.
•Do not use adaptors or extension leads when connecting the appliance to the
  electrical power supply.
•Do not plug in damaged plugs.
•Do not pull, twist or damage the power cable.
•Do not plug-in or un-plug the appliance with wet hands to prevent electrical
  shock.
•This appliance can be used by children aged from 8 years and above and 
  persons with reduced physical, sensory or mental capabilities or lack of 
  experience and knowledge if they have been given supervision or instruction
  concerning use of the appliance in a safe way and understand the hazards 
  involved. Children should not play with the appliance.
•This appliance is designed to be used by adults, do not allow children to play
  with the appliance or let them hang over the door.
•Do not place explosive or flammable material in your appliance for your own
  safety.
•Bottles containing a high percentage of alcohol must be sealed well and placed
  vertically in the refrigerator.
•Do not cover the body or the top of the appliance.
•Fix down the accessories in the appliance during transportation to prevent 

  damage to them.

This model uses natural refrigerant gas as part of its cooling system. This gas 

1

Summary of Contents for SXS905 BLK

















Reviews: