Stoveman Stoveman 16, Installation And Operating Manual

Page: 1 / 7

SAUNA HEATER INSTALLATION AND OPERATING MANUAL
Table 1. Heater specifications
1. GENERAL
Stoveman product range includes various modifications of sauna heaters. You can choose between round and angular shaped
stoves. The heater may have a door panel made of heat-resistant glass or metal (M). The heater can be heated directly from
the hot room or have an extended fire chamber (LS) to be heated
from another room.
Declaration of performance for the purchased
sauna heater type is annexed to the manual.
Choose the heater with suitable heating output for your sauna
room. Sauna room’s suitable cubage for this heater is given in the
specifications.
When choosing a suitable heater it is important to know that
uninsulated wall and ceiling surfaces (such as brick, glass, stone
and concrete surfaces) increase the required output of the heater.
Our sales assistant or a representative of our factory can assist you
at choosing a suitable heater or you can use a special application
for choosing the heater on our website
www.stoveman.ee
http://www.stoveman.ee/kerise-valimine/
1.1. Heater components
(See Fig. 1)
1- Heater stones (not included in the supply)
2- Steel mesh
3- Cleaning hatch
4- Flue gas outlet to be connected with chimney pipe
5- Heater casing
6- Fire chamber door
7- Glass panel door (optional metal door)
8- Ash drawer
9- Fire chamber extension for wall penetration (LS models)
10- Fire grate
Figure 1. Heater components
Type Stoveman 16
Models 16R; 16R-M; 16; 16-M; 16R-LS; 16R-M-LS;
16-M-LS; 16-LS
Heating output in the sauna room 17 kW
Sauna room cubage 8-16 m³
Fuel Wood logs up to 40 cm in length
Refuelling loads 11,2 kg in three parts
Minimum required draft 12 Pa
Required temperature class of chimney T600
Inner diameter of a chimney pipe to be connected to the
heater 115 mm
Safety distance to combustible materials:
sides
ceiling
back
front (from the furnace door)
500 mm
1200 mm
500 mm
1000 mm
Carbon dioxide emissions at 13% O
2
content 0.61%
Total efficiency 66%
Flue gas temperature 443 °C
Weight without sauna stones 70 kg / LS 82 kg; Heavy 92 kg / LS 107 kg
Weight of sauna stones 140 kg
Diameter of sauna stones 10–15 cm
Minimum cross-section of ventilation openings
7850 mm²
Minimum cross-section of smoke flue
10200 mm²
Thickness of furnace walls and ceiling 5 mm; Heavy-8mm
Opening of the ash drawer after igniting the stove up to 10 mm
Mass of generated flue gas 14,7 g/s