19 620 02 0117
12
System Description
3
System Description
3.1
Control and functional elements
The D-ACTOR
®
200 is exclusively controlled using the operating and display elements
on the handpiece.
3
1
2
4
1 Handpiece connector
V-ACTOR
2 Handpiece connector
D-ACTOR
3 Handpiece connector
D-ACTOR
4 Connector
VACU-ACTOR
Fig. 3-1 Front and right side of D-ACTOR
®
200
1
2
3
5
6
1 A/B Switch
2 Mains connector
with mains switch
3 USB-B 1.1 Device
interface
4 Potential
equalisation
5 Footswitch
connector
6 USB-A 1.1 Host
interface
4
Fig. 3-2 Rear side D-ACTOR
®
200
NOTE
The USB-B1.1 connection (Fig. 3-2/3) is generally used for service purposes.
In addition it is possible to connect a Tablet PC.
The USB-A1.1 connection (Fig. 3-2/5) is only used for connecting a USB memory
stick for software update which supports the USB V1.1 protocol or higher.
