Product description
Instructions for use • DRILLCUT-X II/DRILLCUT-X II-35 • WWK497_EN_V1.0_03-2020_IFU_CE-MDR
17
4.8 Technical data
Power input
150 – 200 VA
Operating temperature
10 – 30°C
Operating mode
Intermittent duty
Duty cycle
50%; t = 1 min
Weight with cable
371 g
Max. dimensions (W × H × D)
140 × 34 × 13 mm
Average life cycle
200 reprocessing cycles
Shaver rotation speed (DRILLCUT-X II)
Minimum speed
300 rpm
Maximum speed
10,000 rpm
Start-up maximum speed
4000 rpm
Rotation mode
Oscillation
Shaver rotation speed (DRILLCUT-X
II-35)
Minimum speed
900 rpm
Maximum speed
10,000 rpm
Start-up maximum speed
4000 rpm
Rotation mode
Oscillation
Sinus burr 12k rotation speed (DRILLCUT-X II)
Minimum speed
300 rpm
Maximum speed
12,000 rpm
Start-up maximum speed
12,000 rpm
Rotation mode
Rotation
Sinus burr 35k rotation speed (DRILLCUT-X II-35)
Minimum speed
1,500 rpm
Maximum speed
35,000 rpm
Start-up maximum speed
35,000 rpm
Rotation mode
Rotation
4.9 Storage and usage conditions
NOTICE
Improper storage may damage the product.
The described storage and usage conditions must be complied with.
