Drill/driver
Drill bits
Phillips-head screwdriver
Level
Tape measure
Pencil
Stud finder
A)
Wall Rack
B)
Wall Screws
C)
Machine Washers
D)
Carabiners
1
-
Wall Rack
2
- Wall Screws
2
- Machine Washers
5 lbs. max
per slot
20 lbs. max
per unit
1.
Use a stud finder to locate the nearest studs on the wall you wish to install the rack on. Mark each stud location
with a pencil. Ensure your stud locations are roughly 16” apart.
2.
Hold the rack up to the wall at the desired mounting height. Align the mounting holes with the stud locations
marked in the previous step. Use a level to ensure the rack is evenly balanced horizontally. Once balanced, mark
both mounting hole locations with a pencil.
A
B
D
C
