8
Gültig seit/Valid from/Valide: 09.10.2019
Silicon
up to 180 °C
1.7.2
Servomotors
Parameters
Input voltage:
24 V/DC
Torque:
2 Nm standard servomotor; 2.5 Nm servomotor with return spring
1.7.3
Door switch
STORCH
door switch connection:
Doors closed – switch contact disconnected
Doors closed – switch contact connected
Heat resistance of the
STORCH
door switch:
350 °C
2
INSTALLATION
2.1
Installation procedure
2.1.1
Step 1 – Basic installation
a.
Install the combustion thermal sensor into the smoke flue flow. Only the tip measures
temperature, the rest of the sensor is made of a heat-resistant material that can survive
temperatures of up to 1100 °C.
o
Install into the location prepared by the furnace’s manufacturer
b.
Installation of the control unit in the plastic box
o
Install in an area specified by the manufacturer
c.
Installation of the display panel – LED display
o
install in the wood door
d.
Installation of the door switch
o
The door switch automatically STARTS the burning regulator
o
Installation into the furnace’s frame (see the manual provided in the door switch
packaging)
2.1.2
Step 2 – Set up the burning regulator
Section 3.3 of the service menu describes how to setup the furnace.
2.1.3
Step 3 – Electrical connections
a.
Connect the control unit to accessories according to the attached diagram (thermal
sensor, servomotor, door switch/start button)
b.
Connect the control unit to the display panel with the 2-pin cable. On the display panel,
connect the blue conductor to the BU clamp and the brown conductor to the BN clamp.
c.
Connect the 24 V/DC power adapter.
If installed in an environment with high industrial interference, use a voltage
filter and surge protection.
Summary of Contents for SIC 700 S
Page 13: ...13 Gültig seit Valid from Valide 09 10 2019 2 4 2 Door switch assembly ...
Page 14: ...14 Gültig seit Valid from Valide 09 10 2019 2 4 3 Assembly of the central unit ...
Page 15: ...15 Gültig seit Valid from Valide 09 10 2019 2 4 4 Servomotor assembly ...
Page 16: ...16 Gültig seit Valid from Valide 09 10 2019 2 4 5 Assembly of LED display ...