Stop and Listen Digital Message Recorder 'S': Operating Instructions
Page
1
OPERATING INSTRUCTIONS
DIGITAL MESSAGE RECORDER 'S'
STOP AND LISTEN INC.
CONTENTS
Configuration ......................................
pg. 1
Product Overview ...............................
pg. 2
Making the Right Connections ............
pg. 3
Recording Made Easy ......................
pg. 4
Playback! ............................................
pg. 5
Care and Cleaning .............................
pg. 6
Specifications .....................................
pg. 7
CSA/FCC Notification .........................
pg. 7
TroubleShooting Guide ......................
pg. 8
Connections Diagram .......................
pg. 9
CONFIGURATION
Your new DMR 'S' has a series of internal dip switches has been set during manufacture. These
switches are used to select digital sampling rate vs. maximum message duration. This unit has
been pre-configured as indicated below:
SERIAL NUMBER
________________
MAX. MESSAGE DURATION
80 / 120 / 160 / 240 (sec.)
DIGITAL SAMPLING RATE (kbps)
32 / 37 / 50 / 70
Dip settings should only be changed by a qualified service technician. Refer to the Internal Select Table on the
CONNECTIONS DIAGRAM for switch settings options. There is also an internal tone control that should be re-
adjusted for audio fidelity if the above settings are changed
.
REC/PB
START
STOP
VOL (+)
VOL (-)
STOP & LISTEN
DIGITAL MESSAGE RECORDER S
