STONEX SC400A, User Manual

Page: 14 / 49

October 2021 – Ver. 1 Stonex SC400A CORS Receiver – User Manual 14
4.1 Summary and System Information
Summary command does not have submenus. The System command has 3 submenus: System Information, GPS status, and
Satellites, which will be explained below.
The first two pages of the Summary and System Information command give information about the device and its operation.
The other pages are dedicated to configuration. Each configuration page has the Submit and Reload buttons at the bottom:
no change is effective if the Submit button is not pressed. Reload is used to reload the page with the last saved values
4.1.1 Summary
As shown in the figure below, the Summary reports general information about the Station.
4.1.2 System Information
In System information page the information is divided into blocks, starting from the top we find the name of the station,
expiration date and since it has been in operation. Next, we find information on the model of the device and its serial
number as well as the model of the GNSS and its serial number. Below we find information on the position, GNSS status
and time. After we find a section dedicated to information on the memory. Finally, we have the information on power
supply.