STONEX SC400A, User Manual

Page: 13 / 49

October 2021 – Ver. 1 Stonex SC400A CORS Receiver – User Manual 13
4. Web UI
SC400A has the WEB interface function, you can connect to the SC400A ’s Wi-Fi, enter the WEB interface and view device
information, and set up it. The Wi-Fi hotspot name is the serial number of the receiver.
In the browser window enter the IP address: 192.168.10.1 . This address will open the user registration page (shown below),
in which you need to fill in the username and password. For the first registration you can use the login data shown below.
You will be able to change the password after your first login.
Username: admin
Password: password
After authentication, it will be possible to see the name of the instrument and the list of available commands (below picture).
The commands are shown and analyzed in the following paragraphs.