1
2
1
2
3
Company Quickguide
Insert the card
(always possible in standard menu and ignition ON)
1. Press and hold the driver or co-driver button until tray opens.
2. Insert the card with the chip facing upward.
3. Close the tray by pushing it gently forward.
Withdraw the card
(not possible in all menus)
1. Press and hold the driver or co-driver button until tray opens.
2. Press the card up slightly from underneath through the opening in the tray
or push the edge of the tray down until the card pops out.
Driver
button
Co-driver
card tray
Paper cassette
Driver
card tray
Co-driver
button
E
Cancel, move back to previous display
TR
Select, highlight, change values
y
Confirm, move forward in displays
Default Activity key on/off
This setting gives the opportunity to preset an automatic activity change for
both driver and co-driver when switching the ignition key on or off (consult
relevant authority for national regulations).
1. Press the
OK
button.
Select
Settings
and press OK
2. Select Parameters and press OK
3. Select
Default activ.key on
or
Default activ.
key off
and press OK.
4. Select the preferred activity;
No change
,
Rest,
Available
or
Work
and press OK
.
5. The following is displayed.
6. Press the Back button three times to return
to the standard display.
Daylight Saving Time
An automatic local time adjustment for summer and winter is automatically
prompted on the last Sunday in March and last Sunday in October, respectively.
1. Select YES to acknowledge or
NO
to cancel
the time change.
03:01
Default activ.
key on
Default activ.
key off
Changes
saved
New time?
Parameters
SETTINGS
YES
SE5000-8, 104033P/01R01 EN
STONERIDGE - EVERY ANGLE COVERED
Note! Card handling and browse in menu is only possible when vehicle is not moving.
For full details on the SE5000-8 functionality
we refer to the Driver & Company Manual or
visit www.SE5000.com
Up/Down
button
Back button
Display
OK
button
