StoneFly USO-HA Setup Guide
Software Configuration
© 2020 StoneFly, Inc. | All Rights Reserved.
P a g e
| 47
4.3
Configuring the
Network Settings for the USO’s Management Port
The USO’s management port is preconfigured with the default IP address of 192.168.0.254. This
must be changed to a valid IP address for your LAN network. Using the remote console you
loaded in the previous section:
Press
Enter
to display the login prompt.
At the User ID prompt type
console
and hit
Enter
.
At the password prompt type
coni100o
and hit
Enter
. Note that the User ID and
password are case sensitive.
Using the Storage Concentrator Service menu, enter
2
to select
Network
.
The current network configuration settings will appear as shown below:
Configure all of the network settings to those appropriate for your LAN network by