StoneFly DR365V Setup Guide
Initial Installation
© StoneFly Inc. 2021 | All rights reserved
P a g e
| 29
2.5.
Steps to Configure SCVM Management Port (VMware)
1.
You will need to configure a computer located on the same subnet as the StoneFly
DR365V appliance to allow it to remotely manage the StoneFly DR365V. Open a web
browser on the remote system and in the address bar type in the IP address set in previous
sect
ion “http://DR365V_IP_ADDRESS” and press the
Enter
key. You will see a screen
like the one shown below:
2.
Use the same credentials to log in to the system:
IP address / Name: <
IP address you configured for the DR365V
>
Username
: root
Password
: Stonefly1!
3.
You will see a screen like the one shown below:
