Stone Stonebook Mini, User Manual

Page: 124 / 250

BIOS Utilities
5 - 10 Advanced Menu
5
Battery Engine Enable (Advanced Menu > Advanced Chipset Control)
The sub-menu here allows you to enable/disable the Battery Engine . The Battery
Engine may be set to automatically start charging your battery when the battery
reaches a certain capacity level (e.g. you could start the battery charge level at 40%).
You can then set the level to stop charging (e.g. 100%), and of course this stop
charge level must be higher then the start charge level.
See the sidebar warning for information on running the Battery Engine for an
extended period as this is not recommended
.

Battery Engine
Warning
If you leave the Battery
Engine continuously
"
Enabled ” for a period
of three months or more,
the battery meter's read-
ing accuracy will deteri-
orate.
To reset this, set the
Battery Engine to "
Dis-
abled ", and then allow
the battery to completely
discharge (see
“Battery
FAQ” on page 3 - 18 )
before enabling the
function again.
Figure 5 - 5
Advanced Chipset
Control > Battery
Engine