PFS-TD-24-xx-MT
(formerly PFS-TDTRY-24)
PFS-TD-36-xx-MT
(formerly PFS-TDTRY-36)
1.
Using
white
gloves
provided,
carefully
layout
all
brass
or
nickel
fittings
on
a
protected
surface.
Some
assembly
will
be
required
using
the
included
allen
wrench.
2.
Start
with
the
front
legs.
These
come
pre
‐
assembled
with
the
bottom
collars
set
to
support
the
metal
tray
8”
from
the
ground.
The
height
of
the
collars
can
be
adjusted
using
the
set
screw
to
suit
desired
design
and
space.
If
they
are
moved,
the
included
wood
block
spacers
will
no
longer
be
accurate.
3.
Carefully
slide
the
legs
through
the
metal
tray
unit
from
the
bottom.
We’ve
included
2pcs
of
2x2”
wood
cut
to
8”
to
help
with
the
initial
location
supplied
2x2”s
of
the
drawer
on
the
wall.
4.
Move
the
tray
and
legs
into
position.
Level
the
back
edge
of
the
metal
tray.
Once
level,
use
the
supplied
screws
(and
anchors
if
needed)
to
attach
supplied
2x2”
(1
of
2)
the
tray
to
the
wall.
Once
the
back
is
anchored
to
the
wall,
you
can
twist
the
front
feet
to
help
level
front
to
back.
