59
B58FC1 0000000094 EN 002
OPERATION
6.4.2
Operating the mechanical implement locking mechanism on Euro change frames
⚠
WARNING
Risk of injury due to implements falling down!
The implement may fall down if the implement locking mechanism is open or not locked correctly. This
can cause serious injury to persons standing in the surrounding area.
Only actuate the implement locking mechanism when the implement is set down on the ground or
on a secure rack.
Always check that the implement is correctly locked.
⚠
CAUTION
Risk of crushing due to spring tension!
There is spring tension on the handle of the implement locking mechanism, which closes the locking
mechanism when the handle is lifted. Improper use can lead to injury to hands and fingers.
Always operate the handle with one hand and grab it in the middle.
Opening the implement locking mechanism:
(1) Pull out the handle, turn it slightly towards
the tractor and let it go again to lock the
handle.
(2) Do the same thing with the handle on the
other side.
The implement locking mechanism is open.
Closing the implement locking mechanism:
(1) Slightly pull out the handle, turn towards the
implement and let it go again.
(2) Do the same thing with the handle on the
other side.
The implement locking mechanism is closed.
Checking the implement locking mechanism
(visual check):
Check that the locking pins on both sides are
pushed through the eyelets on the
implement.
The implement locking mechanism is
checked.
Fig. 51 Implement locking mechanism on Euro change
frames
Legend
1
Hook catch
2
Spring
3
Mounting pocket, left
4
Change frame cross tube
5
Mounting pocket, right
6
Implement stop
7
Handle for the implement locking mechanism
8
Pivot point
B0A8
8
8
1
1
2
2
3
3
6
6
4
4
5
5
7
7
