B58FC1 0000000094 EN 002
54
OPERATION
6.2
Operating the parking supports
⚠
CAUTION
Risk of crushing by swivelling components!
When swivelling in the parking supports, limbs can be crushed.
When folding up the parking supports, do not reach between them and the lifting arm bar.
The parking supports serve to safely put down the front loader. Locking struts allow adaptations to be
made for putting down the front loader with different implements as well as on different surfaces.
Unfolding the parking support:
(1) Pull out the locking pin.
(2) Fold down the parking support.
(3) Align the locking strut congruently with one
of the holes in the parking support. To do so,
you may have to slight lift the parking support
again.
(4) Insert the locking pin through the parking
support and the locking strut, and secure
with a linch pin.
Make sure that the same hole was used for
pegging on both sides.
The parking support is unfolded.
Folding in the parking support:
(1) Fold up the parking support until the holes of
the parking support, locking brace and the
lug welded on the lifting arm are congruent.
(2) Insert the locking pin and secure with a linch
pin.
The parking support is folded up.
Fig. 42 Parking support is folded up
Legend
1
Locking pin
2
Parking support
B0AR
2
2
1
1
Fig. 43 Parking support unfolded
Legend
1
Locking pin
2
Parking support
3
Locking strut
B0AS
2
2
1
1
3
3
