B58FC1 0000000094 EN 002
52
OPERATION
6.1.3
STOLL Base Control
⚠
WARNING
Risk of injury due to unexpected movement of the front loader!
If the operating lever is actuated unintentionally, the front loader can move unexpectedly. This can
cause injury to persons in the surrounding area.
Lock the operating lever in the zero setting when the front loader is not in use.
Before using the front loader, immobilise or disconnect other implements on the tractor.
Immobilise or disconnect the front loader before using other implements.
The STOLL "Base Control" operating lever is a
single-lever control unit with up to 3 push-button
switches for additional functions of the front
loader and as an option, 2 micro-buttons on the
sides for tractor functions.
Moreover, the Base Control also has a locking
function, e.g. for driving on roads.
When the locking function is activated, it is
not possible to move the operating lever.
The control of the lever is the same as the basic
controls in
6.1.1 Basic controls with levers
.
The assignment of the buttons for the individual front loader types is shown in the following tables:
Operating lever with one button
Operating lever with 2 buttons
Buttons D and E are intended for the additional tractor functions and therefore have a different
assignment depending on the model and the customer requirements.
Fig. 40 Base Control with 5 buttons
D
D
E
E
C
C
B
B
A
A
B00N
Button
Front loader
Function
A
L, H, P
3rd control circuit
Button
Front loader
Function
A
L, H, P
3rd control circuit
B
L, H, P
4th control circuit
