B58FC1 0000000094 EN 002
64
OPERATION
(2) Drive up close to the implement.
(3) Use the
dumping
function until the change
frame is swivelled out about half the way.
Use the
lowering
function until the hook
catch of the change frame is slightly lower
than the hooks on the implement.
(4) Carefully drive the tractor forwards until the
hook catch of the change frame touches the
implement.
(5) Slightly raise the front loader until the hooks
of the implement are resting on the hook
catch of the change frame.
(6) Use the
scooping
function and drive forward
a bit at the same time, until the stops of the
change frame are resting on the back of the
implement and the eyelets of the implement
are inserted on the mounting pockets of the
change frame.
(7) Switch off the tractor
Apply the parking brake.
Stop the engine.
(8) Close the implement locking mechanism
manually (see
mechanical implement locking mechanism
on Euro change frames
).
(9) Checking the implement locking mechanism
(see
6.4.2 Operating the mechanical
implement locking mechanism on Euro
change frames
Fig. 61 Driving up
B0B1
Fig. 62 Hooking in
B0B2
Fig. 63 Closing the implement locking mechanism
B0B3
