Stoll CMS ADF-3, Operating Instructions Manual

Page: 33 / 444

33
2
Description of knitting machine
2.2 Yarn guide
2.2.3 Autarkic yarn carriers
The machine is equipped with autarkic yarn carriers - the yarn carriers are
not taken along by the carriage but instead each yarn carrier has its own
drive. A toothed belt (1) moves the yarn carrier synchronously with the
carriage or freely, regardless of the carriage direction. A second motor
controls the height of the yarn carrier.
On each yarn carrier rail there are four yarn carriers - two on the front side
and two on the back side.
Each yarn carrier will be individually controlled with the help of the two
motors.
Yarn carrier drive motor

(Motor for the horizontal
movement of the yarn
carrier)

System related yarn carrier run

The yarn carrier moves over the needle bed
together with the carriage.

System independent yarn carrier run

The yarn carrier moves without the carriage

Variable insert position

The insert position of the thread in the needles is
programmable and this way it can be adapted to
the yarn material, the pattern and the work step.

Intarsia and plating patterns are possible without
special yarn carriers.
Height setting motor

(Motor for the vertical
movement of the yarn
carrier)

Variable height position

The height of yarn carrier is programmable for
each knitting row and this way it can be adapted to
the yarn material, the pattern and the work step.