Stoll CMS ADF-3, Operating Instructions Manual, Page: 220 / 444

Adjusting knitting machine
4
KnitLAN connection 4.5
220
4.5 KnitLAN connection
The KnitLAN connection helps in the transmission of data and patterns
between the machine and an M1 or an FTP-Server (FTP = File Transfer
Protocol, network protocol for data transmission).
The KnitLAN connection takes the place of the previous online program. In
this chapter the setting of the KnitLAN connection is described. The
selection of computers for "My network" is described in the MCNET2
manual.
You can use the KnitLAN connection for:

Transmitting knitting programs

Monitoring production

Collecting machine data
Requirements:

Machine and M1 are networking

Operating system of the machine: V 1.2 (or higher)

Software version of M1: V 3.9 (or higher)
Configure the KnitLAN
connection:
Valid for:
This description applies only to machines for which the connection to the Stoll
Nameserver is not active.

If the connection to the Stoll Nameserver is active, the "Network favorites" key is
not available since the KnitLAN connection will be configured on the Stoll
Nameserver.
Key Function
Call up the "Service" menu
Call up the "Basic settings" menu
Call up the "Network favorites" window
Opens the understructure of the marked network.
Closes the substructure of the marked network.
Transfers the selected computer in the field "KnitLAN / ftp"
Deletes the selected computer
Keys for setting the KnitLAN connection