manualshive.com logo in svg

Stoll CMS ADF-3, Operating Instructions Manual, Page: 201 / 444

Share
Download
Stoll CMS ADF-3 Operating Instructions Manual Download Page 201

201

4 

 

Adjusting knitting machine 

4.3  Working with files 

4.3.4

Displaying file in pattern editor

The selected file from the "Load & save" window is displayed in the "Pattern 
editor" window (preview).

   

Displaying file in pattern editor:

1. From the "Main menu" call up the "Load & Save" window.

2. Select the file to be viewed in the file list.

3. Tap the "Display file" key.

4. The "Pattern editor" window is open.

Actions in the "Pattern editor" 

window

"Pattern editor" window

Key

Function

Call up the "Load & save" window

"Display file" key

Call up "Pattern editor" window

Keys for the "Pattern editor" window

Summary of Contents for CMS ADF-3





























































































































































































































































































































































































































































Reviews:

No comments