Stoll CMS ADF-3, Operating Instructions Manual, Page: 144 / 444

Adjusting knitting machine
4
Basic settings 4.1
144
4.1.17 Racking correction
To achieve the optimum transfer position even with different stitch tensions,
the racking specification can be provided with a correction. Usually, the
correction value is provided with a "?" when writing the knitting program.
During knitting, the machine automatically stops in the reversing position
before the line with the correction specification is knitted. Now the optimum
value can be entered.
Explanation Value range
VCI… Racking function VCI1 to VCI50
VK Racking correction by m steps (0-10) Step width: 1/70 of
the needle distance
Dir Direction of the racking correction

< - to the left

> - to the right

? - not defined, will be defined on the
machine
VV Racking speed n (1-32), without an
instruction VV=32
V+/- V+ - Overracking, in addition to the racking
specification

positive value: Overracking in racking
direction

negative value: Overracking in opposite to
the racking direction
(n=1-24, step width:
1/8 of the needle
distance)
Comment Comment ASCII Characters