Stoll CMS ADF-3, Operating Instructions Manual

Page: 130 / 444

Adjusting knitting machine
4
Basic settings 4.1
130
4.1.14 Configuration symbol bar
The configurable toolbar allows you to jump directly to the individual
windows without having to take the "Detour" through the main menu or
using the "Additional functions" key. The toolbar is the headline or title bar
of a window. You can include the symbols of those windows which you use
most often in the toolbar.
The symbols can be called up in any window. To do so, tap the symbol on
the top left of the title bar and the symbols are displayed. (Exception: Tap
on "Go to mask" key in SINTRAL editor). To close the symbols again, tap
the empty field next to them.

"Configuration toolbar" Window
Field/Key Function
1 List of the windows which can be selected for the toolbar.
2 The toolbar contains the symbols of the selected windows. In the
above figure the carriage speed has been selected.
3 Key used to set a symbol in the toolbar (2).
4 Key used to remove a symbol from the toolbar (2).
5 Change the position of a symbol in the toolbar (2). To do so, tap the
symbol in the toolbar and use the corresponding key to move it
forwards or backwards.
6 If there are more than 11 symbols in the toolbar, the display can be
moved to the left or right with the arrow keys.