manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 405

401

8 

 

Software - Installation and basic settings 

8.1  Boot process 

Error diagnostics with Copy 

Logfiles 

If the machine computer has serious problems, e.g. it does not react to any 
inputs or the program crashes any longer, the cause is very important for 
Stoll. The computer saves the data up to the fault internally in so-called 

Logfiles

. For an exact error diagnosis, we want to ask you to save these 

files and to send them to the Stoll-Helpline.

1. Tap on the key "Copy Logfiles".

A selection window for saving a file is displayed.

2. Select the saving location.

3. Confirm input.

The log files are zipped, and saved on the target medium (file 
name:Log_date_time_mcnr.zip).

Restore the last version of 

the Stoll operating system 

1. Tap on the key "Restore Last Version".

A dialog window for confirming the restoration appears.

2. Confirm message.

The "BootOkc" window is displayed. The source (Boot Source) 
"Previous Version (HD)" is automatically set.

3. When the Stoll operating system is to be installed without the final 

configuration tap on the key "Installation".   

 - or - 

➜

When the Stoll operating system is to be installed with the final 
configuration, tap on the key "Installation and Configuration".

The Stoll operating system gets installed.

The current operating system version will be overwritten!

When you restore the saved operating system version, the 
current operating system version is overwritten. 

Only carry out the following steps if you want to replace the 
current operating system by the previous version.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands