Stoll CMS 730 S Operating Instructions Manual Download Page 362

Page: 362 / 468

Repairing the knitting machine

Replacing parts 7.3

358

7.3.10

Replacing gear racks in the step motor

There are different models depending on the machine type and the gauge.

Type 1

Replacing gear racks:

1. Take off the step motor.

2. Rotate positioning disk (1) to the mounting position (5 o'clock).

3. Turn over the step motor and check the mounting position.



The adjustment is correct if



The upper gear rack (2) and the boring are aligned.



The lower gear rack (3) and the boring are aligned.

Valid for:

CMS 530, CMS 520, CMS 822, CMS 933

E10 │ E12 │ E14 │ E16 │ E18 │

E6.2

│

E7.2

│

E8.2

│

E9.2

2 upper gear rack

Control of the stitch tension

3 lower gear rack

Control of the pressure parts for tuck and stitch
take over

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands