manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 196

Adjusting knitting machine  

4 

Advanced adjustments  4.2 

192

4.2.18

Adjusting intarsia yarn carrier (type 1) *

The yarn carriers are correctly adjusted if

an unswiveled yarn carrier passes by a swiveled yarn carrier

the distance between the cam center of the knitting system and the yarn 
carrier in each system is identical in both carriage directions

the thread is laid on the open latch at exactly the same point by each 
yarn carrier for both selvedge needles

the yarn carrier tips move exactly between the needle beds in the 
needle cross and the distance between yarn carrier tips and the closed 
needle latch is 0.5 mm to 1 mm

the yarn carriers of the track 1 and 8 are also set 0.5 mm higher so that 
they do not touch the limiters (3)

Adjusting intarsia yarn carriers:

1. Remove needle brushes by loosening screws (1).

Screws of needle brushes

2. Park the carriage assembly in needle space.

Adjusting the intarsia yarn carriers

3. To adjust the height of the yarn carrier, loosen the screw (1).

4. Adjust the height of the yarn carrier and retighten the screw (1).

5. To adjust the position of the yarn carrier head relative to the needle 

beds, loosen the screw (2).

6. Adjust the position of the yarn carrier head relative to the needle beds, 

retighten the screw (2) and coat it with a screw locking compound (e.g. 
Loctite 221).

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands